Pengaruh Delignifikasi Termal terhadap Substansi Dinding Sel pada Limbah Bunga Jantan Kelapa Sawit Pasca Anthesis

Authors

  • Ratih Rahhutami E-mail: rahhutamiratih@gmail.com, Politeknik Kelapa Sawit Citra Widya Edukasi
  • Aline Sisi Handini Politeknik Kelapa Sawit Citra Widya Edukasi
  • Indriana Lestari Universitas Pembangunan Nasional Veteran Yogyakarta

DOI:

https://doi.org/10.25181/jaip.v8i2.1377

Keywords:

bioethanol, cellulose, hemicellulose, holocellulose, lignin

Abstract

The post anthesis of male oil palm is one of the under utilized solid wastes,  with potential for processing into biofuel or bioethanol, as a welcome alternative to fossil fuels  The purpose of this study is to determine the best levels and the effect of several thermal delignification cycles on the levels of lignin, holocellulose, and cellulose.  This research used a one factor completely randomized design method with 3 treatments; one, two, and three cycle thermal delignification and data analyzed has a 5% variance. The results showed that the treatment of thermal delignification with several cycles had a significant effect on the levels of lignin, holocellulose, and cellulose. The best levels of lignin, holocellulose and cellulose were shown in the treatment of three cycles of thermal delignification.

Downloads

Download data is not yet available.

Author Biography

Ratih Rahhutami, E-mail: rahhutamiratih@gmail.com, Politeknik Kelapa Sawit Citra Widya Edukasi

Program Studi Budidaya Perkebunan Kelapa Sawit

References

Browning, B.L. (1967). Methods of Wood Chemistry. New York: Interscience.

[BSN] Badan Standardisasi Nasional. (1989). Standar Nasional Indonesia Nomor 1032 tentang Cara Uji Kadar Sari Ekstrak Benzena Dalam Pulp dan Kayu. Jakarta.

Cross, C.F., & Bevan, E.J. (1912). Researches on Cellulose III. London: Longmans Green.

Fitria. (2008). Pengolahan biomassa berlignoselulosa secara enzimatis dalam pembuatan pulp: studi kepustakaan. J. Teknologi Pertanian, 9(2), 69-74.

Ginting, C., & Panjaitan, M. (2018). Perkembangan fruit set tandan kelapa sawit (Elaeis guineensis Jacq.) dengan perlakuan berbagai formula hara. Agroista J. Agroteknologi, 2(01), 41-51.

Harmsen, P.F.H. (2010). Literature Review of Physical and Chemical Pretreatment Processes for Lignocellulosic Biomass. Food & Biobased Research. Energy Research Centre of the Netherlands.

Hermiati, E., Mangunwidjaja, D., Sunarti, T. C., Suparno, O., & Prasetya, B. (2010). Pemanfaatan biomassa lignoselulosa ampas tebu untuk produksi bioetanol. J. Litbang Pertanian, 29(4), 121-130.

Lismeri, L., Utami, R.S., Darni, Y., Hanif, M., & Riyanto, A. (2018). Produksi gula reduksi dari batang ubi kayu dengan hidrolisis menggunakan asam encer dan induksi medan elektromagnetik. J. Rekayasa Kimia dan Lingkungan, 13(1), 8-14.

Novia, Wijaya, D., & Yanti, P. (2017). Pengaruh waktu delignifikasi terhadap lignin dan waktu SSF terhadap etanol pembuatan bioetanol dari sekam padi. J. Teknik Kimia, 23(1), 19-27.

Oktaveni, D. (2009). Lignin Terlarut Asam dan Delignifikasi Pada Tahap Awal Proses Pulping Alkali. Unpublished undergraduate thesis, Institut Pertanian Bogor, Bogor.

Prastowo, B. (2007). Potensi sektor pertanian sebagai penghasil dan pengguna energi terbarukan. Perspektif, 6(2), 84 - 92.

Sudiyani, Y., Waluyo, J., Riandi, A.P., Primandaru, P., & Novia. (2015). Pengaruh temperatur dan waktu tinggal pada perlakuan awal bagas sorgum dengan metode steam explosion. J. Teknik Kimia, 21(4), 47-56.

Sun, Y., & Cheng, J. (2002). Hydrolysis of lignocellulosic materials for ethanol production: a review. Bioresource Technology, 83, 1-11.

Downloads

Published

2020-10-01

How to Cite

Rahhutami, R., Handini, A. S., & Lestari, I. (2020). Pengaruh Delignifikasi Termal terhadap Substansi Dinding Sel pada Limbah Bunga Jantan Kelapa Sawit Pasca Anthesis. Jurnal Agro Industri Perkebunan, 8(2), 61-68. https://doi.org/10.25181/jaip.v8i2.1377

Issue

Volume 8 No. 2, Oktober 2020

Section

Article

License

Copyright (c) 2020 Ratih Rahhutami, Aline Sisi Handini, Indriana Lestari

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with Jurnal Agro Industri Perkebunan agree to the following terms:

Authors retain copyright and grant the Jurnal Agro Industri Perkebunan right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material for any purpose, even commercially) with an acknowledgment of the work's authorship and initial publication in Jurnal Agro Industri Perkebunan.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Agro Industri Perkebunan. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.