Milled Rice Quality Evaluation of Some Hope Strain Rice Field Rice (Oryza sativa L.)
DOI:
https://doi.org/10.25181/jppt.v17i1.42Abstract
The purpose of this study was to determine the quality of milled rice paddy rice several promising lines. The study was conducted in the village of Banjarrejo District of Batang, East Lampung Regency and Lampung State Polytechnic in November 2012 using a completely randomized design with 10 treatments and three replications. The treatment consisted of 10 new rice paddy promising lines 1. IPB 3S, 2. IPB 4S, 5R IPB 3., 4. IPB6R, 5. IPB117-F-7-2-1, 6. IPB 117-F-7-7 -1, 7. IPB 117-F-14-4-1, 8 IPB 117-F-15-4-1, 9. IPB 117-F-20-1-1, and 10. The IPB 117-F- 80-2-1. The results showed that the quality of milled rice paddy rice several promising lines tested have diversity in terms of: rendemen , milling degree, water content, grain heads, broken grains, brewers grains, grains of red, yellow grain, grain whitewash, and grains. Eight promising lines meet minimum standards milling degree, 10 strains meet the standard of a maximum water content, 2 lines meet minimum standards of grain heads, two lines meet minimum standards of broken grains, 9 strains meet the minimum standards of red grains, 7 strains meet minimum standards yolks, 1 strains meet minimum standards grains whitewash, 10 strains meet the minimum standards of foreign objects, and 6 lines meet minimum standards grains of milled rice quality requirements of quality I ISO 6128: 2008.Keywords: quality of milled rice, promising lines, paddy riceDownloads
References
Dulbari. 2012. Uji Daya Hasil Beberapa Genotipe Padi Sawah (Oryza sativa L.) pada Dua Lokasi Berbeda. Tesis Pascasarjana Magister Agronomi Fakultas Pertanian Universitas Lampung.
Fattah, A. dan Nuraeni, S. 2007. Uji Beberapa Galur Harapan Padi terhadap Serangan Hama Tikus di Kabupaten Pangkep Sulawesi Selatan. Laporan Penelitian BPPT Sulawesi Selatan.
Ismail, M. dan Tjahjono, E.W. 2001. Prospek Pengering Gabah Tipe Portabel Bacth Dryer Skala Industri Pedesaan. Majalah Ilmiah : Pengkajian Industri. Edisi No. 15.
Mardiah, Z. Dan Indrasari, S.D. 2010. Karakterisasi Mutu Gabah, Mutu Fisik, dan Mutu Giling Beras Galur Harapan Padi Sawah. Publikasi Penelitian. Balai Besar Penelitian Tanaman Padi. Sukamandi.
Nugraha, S. 2009. Evaluasi Mutu Beras di Propinsi Jawa Barat, Jawa Tengah, dan Jawa Timur Hasil Panen Musim Kemarau 2007. Buletin Teknologi Pascapanen Pertanian. Volume 5
Nugraha, S. Setyono, A. Damardjati, D.S. 1990. Penerapan Teknologi Pemanenan Padi dengan Sabit. Hasil Penelitian Pascapanen 1988/1989. Balai Penelitian Tanaman Pangan Sukamandi. Buku II Hal 11-15.
Permana, D.H. 2010. Keragaan Galur Harapan Padi Sawah Tipe Baru di Sukabumi dalam Rangka Uji Multilokasi. Skripsi Departemen Agronomi dan Hortikultura Fakultas Pertanian Institut Pertanian Bogor.
Setyono, A. Guswara, A. Suwangsa, E. Sutrisno. Suismono. Sutisno, E. Sudir. Dan Munarso, S.J. 2003. Produksi Beras Bersertifikat. Laporan Akhir Penelitian Skala Pilot. Balai Penelitian dan Pengembangan Pertanian Departemen Pertanian. Jakarta
Soemardi dan Thahir, R. 1991. Penanganan Pascapanen Padi. Dalam Edi Soenardjo, Djoko S. Darmardjati, dan Mahyudin Syam (Ed.). Padi Buku 3. Balitbang Pertanian, Pusat Penelitian dan Pengembangan Tanaman Pangan. Bogor.
Soemardi. 1982. Produksi, Rendemen , dan Mutu Gabah/Beras Hasil Panen Petani. Laporan Kemajuan Seri Teknologi Pascapanen No. 15 (Padi). BPPT Bogor Sub BPTP Kerawang.
Standar Nasional Indonesia. 2008. SNI 6128:2008. Standar Mutu Beras Giling. Badan Standardisasi Nasional.
Taher, R. 2010. Revitalisasi Penggilingan Padi Melalui Inovasi Penyosohan Mendukung Swasembada Beras dan Persaingan Global. Balai Besar Penelitian dan Pengembangan Pascapanen Pertanian. Pengembangan Inovasi Pertanian 3(3). Hlm 171-183.
Wijaya. 2005. Pengaruh Kadar Air Gabah terhadap Mutu Fisik Beras Giling. Laporan Penelitian Fakultas Pertanian Unswagati Cirebon. 12 hlm.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.