Analisis Pengendalian Kualitas dalam Upaya Meminimalisasi Tingkat Kerusakan Produk Gula Rafinasi

Authors

  • Faris Ghiyats
  • Fadila Marga Saty Politeknik Negeri Lampung
  • Dewi Riniarti Politeknik Negeri Lampung

DOI:

https://doi.org/10.25181/jaip.v8i2.1319

Keywords:

quality control, refined sugar, six sigma

Abstract

Non-conformance occurs due to unavoidable production process, and there is need to reduce the potential occurrences as well as provide a solution to minimize the level of mismatch.  This study aims to identify the percentage and types of discrepancy experienced, by analyzing process capabilities and identify underlying factors in inconsistency. The research was performd in May 2018 at the department of process PT Sugar Labinta, Tanjung Sari, Lampung Selatan. Furthermore, analysis involved the six sigma method with a structured DMAIC approach, while the tools used include check sheet, caused diagram, p-control chart, and Pareto diagram. The results were then processed with the Minitab 18 software, which demonstrated the level sigma process in PT Sugar Labinta to be 5,04 with a DPMO of 238,32. The table of achievement indicates the company performance to be at an average level, in contrast with industries in the USA. However, the level of Sigma 6 is attainable under the circumstances where product-related inconsistences do not exceed 8 tonnes per month.

References

Arum, I.M.S. (2017). Analisis Kapabilitas Mutu di Pabrik Gula Tjoekir Jombang Periode Giling Tahun 2016. Unpublished undergraduate thesis, Institut Teknologi Sepuluh November, Surabaya.

Assauri, S. (2016). Manajemen Operasi Produksi Pencapaian Sasaran Organisasi Berkesinambungan (3rd ed.). Jakarta: Rajawali Pers.

Basuki, B., & Sari, V. K. (2020). Efektifitas dolomit dalam mempertahankan pH tanah Inceptisol Perkebunan Tebu Blimbing Djatiroto. Buletin Tanaman Tembakau, Serat & Minyak Industri, 11(2), 58-64.

Bustami, B., & Nurlela. (2007). Akuntansi Biaya Teori dan Aplikasi. Yogyakarta: Graha Ilmu.

Ekoanindiyo, F. A. (2014). Pengendalian Cacat Produk Dengan Pendekatan Six Sigma. Jurnal Ilmiah Dinamika Teknik, 8(1), 35-43.

Evans, J. R., & Lindsay, W. M. (2007). An Introduction to Six Sigma and Process Improvesment. Jakarta: Salemba Empat.

Fajrin, A. El, Hartono, S., & Waluyati, L. R. (2015). The demand for refined sugar in food and beverage and pharmaceutical industries (in Indonesia). Agro Ekonomi, 26(2), 150–158. https://doi.org/http://dx.doi.org/10.22146/agroekonomi.17267

Febrina, S. (2007). Penerapan Metode Six Sigma DMAIC untuk Perbaikan Kualitas Fisik Batang Rokok Merk Samudera Emas 16 pada Cigarette Maker Machine (Studi Kasus PT. Asia Marko). Unpublished undergraduate thesis, Universitas Sebelas Maret, Surakarta.

Findari, W. S., & Nugroho, Y. A. (2019). Optimasi sistem antrian pada layanan kesehatan masyarakat menggunakan pendekatan simulasi. Jurnal Manajemen Industri dan Logistik, 3(1), 14-22.

Gasperz, V. (2002). Pedoman Implementasi Program Six Sigma Terintegrtitas dengan ISO, 9001:2000, MBNQA dan HACCP. Jakarta: PT Gramedia Pustaka Utama.

Gasperz, V. (2007). Lean Six Sigma. Jakarta: PT Gramedia Pustaka Utama.

Isnawati, S. F. (2009). Analisis Strategi Bersaing Gula Rafinasi pada PT Jawamanis Rafinasi. Unpublished undergraduate thesis, Institut Pertanian Bogor, Bogor.

Liquiddanu, E. (2007). Perbaikan Kualitas pada Proses Kiln Tegel Keramik Kode GE dengan Metode Six Sigma DMAIC (Studi Kasus PT . IKAD Tangerang ). Performa, 6(1), 1–13.

Park, S. H. (2003). Six Sigma for Quality and Productivity Promotion. Tokyo, Japan: Asian Productivity Organization.

Pusat Pengkajian Perdagangan Dalam Negeri. (2018). Analisis Perkembangan Harga Bahan Pangan Pokok di Pasar Domesrik dan Internasional. Kementerian Perdagangan Republik Indonesia.

Saputra, Y. H. (2020). Perspektif ketersediaan gula domestik dan swasembada gula nasional. Perspektif, 19(1), 63-78.

Sulistyowati, D. P., & Anggarini, S. (2017). Pengendalian kualitas pengalengan jamur dengan metode six sigma di PT Y, Pasuruan, Jawa Timur. Jurnal Teknologi dan Manajemen Agroindustri, 6(1), 1–7.

Widji T, N. (2017). Perancangan vacum evaporator metode liquid ring vacum. Jurnal Teknik Kimia, 12(1), 24–27.

Wiyono, R.S. (2004). Penerapan Stastistical Process Control (SPC) pada Pengolahan Secara Basah Kopi Arabika. Unpublished undergraduate thesis, Universitas Jember, Jember.

Published

2020-10-05

How to Cite

Ghiyats, F., Saty, F. M., & Riniarti, D. (2020). Analisis Pengendalian Kualitas dalam Upaya Meminimalisasi Tingkat Kerusakan Produk Gula Rafinasi. Jurnal Agro Industri Perkebunan, 8(2), 69-83. https://doi.org/10.25181/jaip.v8i2.1319

Issue

Section

Article