Pengujian dan Evaluasi Alat Tanam Benih Langsung Model Paddy Seeder Tipe Drum 12 Baris Sistem Ditarik Tangan untuk Lahan Sawah

Penulis

  • D. A. Budiman Balai Besar Pengembangan Mekanisasi Pertanian

DOI:

https://doi.org/10.25181/prosemnas.v0i0.493

Abstrak

As population growth in Indonesia, demand for rice, growing (good for food). To meet the needs of the paddy, the Ministry of Agriculture in 2016 will increase rice production at 20.67 million tons, an increase of 8,96million tons (up 9,74 %) from the production of 72.19 million tons in 2015 to increase the area rice harvest of 860.48 thousand hectares (an increase of 6.18%). While land productivity strived rose to 7.16 quintals per hectare (up 8.36%). To achieve these targets, it is necessary to support components of appropriate technologies, efficient and productive in the cultivation of rice seeds.Cropping tools technology with Direct seeder 12 Rows Models, Drum Type and Hand Pull System is expected to accelerate the time of planting, especially applied to low land with the technical irrigation land, for the larges land and the pattern of cropping index paddy-paddy-paddy or paddy-paddy-crops. The paddy seed cropping tool operated manually. With a spacing of 14 x 18.00 cm and working speed 0,38m / sec (1.36 km / h), so the capacity of the field work for corn planting an average of 11.78 hours /ha (0.08 ha /h). The number of seeds of 4.675 grains / hole with an empty hole (missing hill) of 4.5 % and work efficiency to 84.80%.Keywords: Paddy, Direct Seeder,12 rows model, Drum type, Hand Pullsystem.

Unduhan

Data unduhan belum tersedia.

Referensi

Budiman, D.A : Pengujian Dan Evaluasi Alat Tanam Benih Langsung Model Paddy Seeder Tipe Drum …

Prosiding Seminar Nasional Pengembangan Teknologi Pertanian V Polinela 2016 307

Irwanto, A.K., 1983. Alat dan Mesin Budidaya Padi, Fakultas Teknologi Pertanian, Institut Pertanian

Bogor, Bogor.Oldeman, L.R., Irsal Las, dan Muladi, 1980. The Agroclimatic Map of Kalimantan,

Irian Jaya, and Bali, West and East Nusa Tenggara. CRIA. Bogor. Indonesia.

Purwadi, T., 1999, Mesin dan Peralatan utama tanam benih, Fakultas Teknologi Pertanian Universitas

Gadjah Mada, Jogjakarta.

Rahmat ariza, 2010.Grain Seeder.http://rahmatap.blogspot.com/2010/07/sekilas-tentang-mesin-penanam-

seeder.html

Renstra Kementan, 2015. Peraturan Menteri Pertanian Republik Indonesia No. 19/Permentan/Hk 140/4/2015

Tentang Rencana Strategis Kemeterian Pertanian Republik Indonesia Tahun 2015 – 2019.

Kementerian Pertanian Republik Indonesia. Jl Harsono RM No. 3 PS Minggu, Ragunan, Jakarta.

Vetsch, Jeffrey A., Gyles W. Randall, and John A. Lamb. " Paddy, Corn and soybean production as affected

by tillage systems." Agronomy Journal 99.4 (2007): 952-959Ahmad shodik, 2010. Pengenalan Dasar Alat Dan Mesin Penanam Biji-bijian. (http://materikuliahq

blogspot.com/2010/02/pengenalan-dasar-alat-dan-mesin-penanam benih jagung dan kedelai.html)

Jumat, 12 maret 2010.

Anonim, 2015. Kesepakatan Dagangan Masyarakat Ekonomi ASEAN (MEA 2015). Kementerian Pertanian

Republik Indonesia.Jl Harsono RM No. 3, Ragunan, PS Minggu Jakarta.

Anonim, 2015. Melongok Program Kerja Kementan 2016 dan DukunganPendanaannya. Kementan

Republik Indonesia.

BBP Mektan, 2016. Laporan Bulanan pada Bulan Agustus 2016 Balai Besar Pengembangan Mekanisasi

Pertanian. Situgadung, Tromol Pos 2, Serpong, Tangerang , Banten.

BPS, 2015. Laporan Bulanan Data Sosial Ekonomi 2015 Edisi 57.Biro Pusat Statistik.Jl. Dr. Sutomo No.

– 8 Jakarta 10710.

Budiarti, 1993. Viabilitas benih padi yang berpengruh pada produksi. Fakultas Teknologi Pertanian,

Universitas Gadjah Mada, Jogjakarta.

DE BRUIN, Jason L.; PEDERSEN, Palle. Effect of row spacing and seeding rate on paddy yield. Agronomy

journal, 2008, 100.3: 704-710.

##submission.downloads##

Diterbitkan

2016-09-01

Terbitan

Bagian

Artikel