Peningkatan Uji Kuat Tekan Paving Block Dengan Bahan Limbah

Penulis

  • Andy Eka Saputra Politeknik Negeri Lampung

DOI:

https://doi.org/10.25181/tektan.v11i3.1467

Abstrak

The research will be carried out at the Soil and Water Engineering Laboratory and the Lampung State Polytechnic Agricultural Mechanization Laboratory for 6 months. In the results of each manufacture of Paving blocks for each sample, the compressive strength value is quite stable and continues to increase starting from day 1 to 28. Cement as a binding material succeeded in binding fly ash and bottom ash perfectly due to the fly ash and bottom ash content reaching optimum laboratory standard density with dry content weight of 1.47 gr/cm3 with the addition of 3000cc water at a ratio of 1: 4 making a determinant of the strength of the paving block by achieving average maximum strength of 192 kg/cm2 or K 190 and 214 kg / cm2 or K 200 at 28 days old, and included in the class B katogari SNI 03 -0691-1996, with these results showing a high increase in class D quality in research previously increased to quality B with SNI standards. Keywords: paving blocks, fly ash, bottom as.,

Unduhan

Data unduhan belum tersedia.

Referensi

ACI Committe. (1989). Building Code Requirements For Reinforced Concrete Institute. Detroit.

Annual Book of ASTM Standards. (Volume 04.02 2001). Concrete and Aggregates. American Society forTestingand Materials. American: West Conshohocken PA.

Dharma, U. S., & Dwiyuono, L. (2016). Analisa Pengepresan Dengan Sistem Hidrolik Pada Alat Pembuat Paving Block Untuk Perkerasan Lahan Parkir. Jurnal Teknik Mesin Univ. Muhammadiyah Metro, Vol 5 No. 1.

Lincolen, K. (2017). .Pengaruh Abu Terbang Sebagai Bahan Pengganti Semen Pada Beton Beragregat Halus Bottom Ash. Digilib Unila.

Saputra, A. E., & Sebayang, S. (2003). Studi Pemakaian Campuran Beton Non-Pasir dengan Agregat Kasar Limbah Baja (Steel Slag) Sebagai Bahan Perkerasan. Jurnal Penelitian Rekayasa Sipil dan Perencanaan, 26.

Saputra, A. E., Raharjo, I., & Suprapto. (2018). Uji Eksperimental Kuat Tekan Mortar Paving Block Dengan Bahan Limbah Substitusi Agregat Halus dan Semen. Prosiding Seminar

Nasional Pengembangan Teknologi Pertanian, http://jurnal.polinela.ac.id/index.php/PROSIDING.

Sebayang, S. ( 2011). Perbandingan MutuPaving BlockProduksi Manual dengan Produksi

Masal. .Jurnal Rekayasa , Vol 15 No. 2 Agustus.

SNI, 0.-0.-1. (1996). Bata Beton Paving Block. Bandung: Badan Standariasi Nasional.

Sulistyowati, N. A. (2013). Bata Beton Berlubang Dari Abu Batubara (Fly Ash Dan Bottom Ash) Yang Ramah Lingkungan. Jurnal Teknik Sipil Perencanaan, Vol 15 No 1.

##submission.downloads##

Diterbitkan

2019-12-16

Cara Mengutip

Saputra, A. E. (2019). Peningkatan Uji Kuat Tekan Paving Block Dengan Bahan Limbah. Jurnal Ilmiah Teknik Pertanian - TekTan, 11(3), 165-172. https://doi.org/10.25181/tektan.v11i3.1467

Terbitan

Bagian

Artikel